Non-Structural Track

Product Description Uses/Applications

Track is roll-formed from corrosion resistant steel and is available in lengths from 1¼ inch to 2 inch legs. Track is designed to receive corresponding stud sizes and is used in partition wall framing from the floor and the ceiling as well as exterior walls with joist material and header product.

Solid web section with a slight overbend for friction fit eases the installation of drywall studs.

Specifications

SIZES(Depths): 1 5/8 inch (162), 2.5 inch (250), 3 5/8 inch (362), 4 inch (400), 6 inch (600)

HEIGHTS: 1¼ inch (125), 2 inch (200)

GAUGES (Mils): 25 (18), 22 (27), 20 (33), 18 (43), 16 (54), 14 (68)

LENGTHS: Stock lengths of 10 feet (cut to length upon request) with a six foot minimum. Longer leg track is available upon request.

Complies with ASTM C-645

Product Technical Information

Steel Stud Manufacturers Association - Product Technical Information

Track Section Properties (refer to pages 9-11)

Product Benefits

• Higher Strength to Weight Ratio
• Termite/Mildew-Resistant
• Non-combustible
• Dimensionally Stable
• More Consistent Quality