Drywall Studs
Product Description Uses/Applications
Drywall studs are roll-formed from corrosion resistant steel and are primarily used for interior non-load bearing partition wall construction. Knurled flanges prevent screw "ride-up" which expedites the attachment of gypsum wallboard. Punchouts are strategically located to facilitate electrical conduit, plumbing and/or bridging if required.
Specifications
SIZES (Depths): 1 5/8 inch (162), 2.5 inch (250), 3 5/8 inch (362), 4 inch (400), 6 inch (600)
GAUGES (Mils): 25 (18), 22 (27), 20 (33)
LENGTHS: Stock length is readily available, cut to length upon request, six foot minimum
Complies with ASTM C-645
Product Technical Information
Steel Stud Manufacturers Association - Product Technical Information
- Steel Con trusses are designed by Steel-Con personnel using the advanced Keymark IT software. Our trusses are sealed by a licensed professional engineer. As with traditional wood trusses, the overall building design - including such items as bracing, hold downs and sheathing attachments - is the responsibility of the engineer/architect of record.
- Non-Structural Stud Section Properties (refer to page 6)
- Limiting Wall Height Tables (refer to pages 12-15)
- Ceiling Span Table (refer to pages 42-43)
Product Benefits
- Higher Strength to Weight Ratio
- Termite/Mildew-Resistant
- Non-combustible
- Dimensionally Stable
- More Consistent Quality